Paint shop today
- Thread starter Jighead76
- Start date
Fatman
Active member
If you're using the plastic filters, or polyprofylene (sp) material - empty all the powder into a flat container and get either a can of compressed air, or compressor if you have one. I use a air blower that fills my air mattresse's for camping take it outside check wind direction and give it a blast of air from both sides of the cup. This should clean it right out, it's all I do to mine.
Fatman
Active member
You posted your pic while I was typing the reply - Nice setup but do one thing which will save you some cleanup!! Put some newspaper down!!LOL
Fatman
Active member
If you come up with any cool mix's post em up!!!
Ron Don
Future Sponsor
Great looking jigs! Like the paint jobs. Company in Ark makes baits that look a lot like those. Dont remember their exact name but its Ozarks something.
Fatman
Active member
You brush tapping your 3 color heads??? They look good!!
Bkabina
Member
Nice jigs.
Is it possible that water is getting trapped in the fluidizing material? I would wipe it out with a towel and use a vacuum to clean them out. Maybe letting them set empty with the air on for awhile will help dry any trapped water. Or maybe a hair dryer would work.
This is just my guess. I'm not sure, I don't have the regular fluidizing stuff. I am still learning and building my beds.
Is it possible that water is getting trapped in the fluidizing material? I would wipe it out with a towel and use a vacuum to clean them out. Maybe letting them set empty with the air on for awhile will help dry any trapped water. Or maybe a hair dryer would work.
This is just my guess. I'm not sure, I don't have the regular fluidizing stuff. I am still learning and building my beds.
Fatman
Active member
What do you mean by clogged??? The powder is just sitting there while the rest has a boiling action?? and is it only certain colors???
Sorry I had a busy weekend. Thanks for the comments and I've figured out the fluid bed. I vacuumed it out and it's like new. Anyway I do and always have had problems with certain colors. Some I don't even bother putting in because they seem too heavy. Also if theirs post to that I haven't responded too its because I can't find them. Is there anyway I can auto subscribe to everything I post to?
Jighead76 said:
In your user control panel under edit options you can change when you receive notifications and what threads you subscribe to and all that good stuff:
http://www.jigcraft.com/jigcraft/usercp.php?action=options
Actually, that may not be the info you were wanting...... not even sure how my own site works at times. 
Could be wrong, but it may subscribe to everything you post to here -
http://www.jigcraft.com/jigcraft/usercp.php?action=subscriptions
It is in your User Control Panel down towards the bottom left side listed as Subscribed Threads.
Could be wrong, but it may subscribe to everything you post to here -http://www.jigcraft.com/jigcraft/usercp.php?action=subscriptions
It is in your User Control Panel down towards the bottom left side listed as Subscribed Threads.