BucktailJiger
New member
- Joined
- Dec 2, 2011
- Messages
- 1,166
Doing a 100K timing belt on my 02 Isuzu Rodeo 3.2L V6 , Factory rec @ 75 - 100 K . Doing WP , Hyd Tensioner , tensioner pully and idler . Got all the marks lined up on both cams and the crank per service manual , noticed the marks on the OE belt are not lined up . Is this normal ? New belt marks all line up correctly . Been a few years since I did a belt and can't remember if this is normal . Thanks Quint